Standard Electrochemical Cell

Standard Electrochemical CellThis is a stationary solution standard electrochemical (electrolytic) cell for measurements of electrodes in a form of: a) rod disc (6 mm dia.), b) thin film deposited on flat substrate (using a sample holder) and c) free standing membrane (using the basic sample holder). The working, counter and reference electrodes (not included in the setup) are mounted in a top casing either in 2 , or 3 electrode setup. The cell has two spare ports for connection

2 x electrode gasket

as it is inert to nearly all organic and inorganic compounds

sustainable pressure is 50Mpa (~0

Stainless Steel 316L/317L

constant current & constant voltage charge(CC-CV)

A preferable thickness of the electrode coating is between 100 nm up to several micrometers

72 (wt%) Ni+Fe+Mn: 50

These metals are often preferred due to their superior electrical conductivity and mechanical robustness

reservoir maximum volume: 50 mL

EQ-Die-12D-GP graphite die is good for dry pellet pressing ceramic material at high temperature up to 1700 ºC

P_(actual on working piece )= (3

Two pushing rods highly polished and perfectly fitted into die