2002-2009 GX470 Panhard Correction Kit (PCK)®

2002-2009 GX470 Panhard Correction Kit (PCK)®The Original PCK Weld on bracket kits to correct the Panhard bar angle on 2 4. 5" of lift. The Panhard Correction Kit returns the panhard bar to horizontal (per the original design), eliminates the need for an aftermarket adjustable panhard bar to recenter the axle, and, in most cases (up to 4 inches of lift), raises the roll center for improved handling (a 4 4. 5 inch lift maintains the roll center of an adjustable panhard). Includes: (1) Lift

Designed to slide right over the factory mount & weld up

By making them weld-on

Q – Is this bumper available with a swing-out option

and the axle centerline is lower than the radius arm rear pivot at rest

I haven't verified

A – they’re for Rigid Industries IGNITE back up light kit – 20641

A lower link limit strap tab and shock bolt that clears 2

Those without a body lift will need to clearance the rib below the floor as needed to clear the top of the tank (hey – you’ve already cut the spare tire crossmember out

and 4-inch lift heights

You will need to cut out the pinch weld in the rear of the wheel well on each side

By basing our design around a 1″ body lift

feel free to contact me with any questions when you get to this step