SparkFun Thumb Slide Joystick Buttons/Switches

SparkFun Thumb Slide Joystick Buttons/SwitchesThis is a resistive analog joystick, very similar to those found on the PSP1000. These compact joysticks are different in that they have a very interesting slide feeling. For wiring this part, if you look at the device from the bottom the pin out goes 1) x axis output 2) +5V 3) y axis output 4) gnd Pin 4 is the pin closest to the 2 mounting tabs found on one side of the device. When connected to an Arduino, you can expect a range of about 128 to 775

Use these to jumper from any male header on any board

You need a way to secure the ring to the PCB (screws and rivets have been shown to work)

We also carry a similar red binding post

You should not need this adapter with any of our antennas or dev boards

They are ½" long and come in packs of ten

Single piece seamless on surface

This is a 4" connector cable that interfaces U

) of the PIC32’s I/O pins are broken out

Max current sensing: 90A

After you have successfully assembled the kit

The lens is 3mm in diameter and it is diffused

How to Install FTDI Drivers